American Craft Council Baltimore Show 2010
Nico Yektai Furniture Booth 1207
The American Craft Council’s flagship show in Baltimore MD is rapidly approaching. Hundreds of artists like myself will be gathering to display their latest work. The craft councils website is hard to navigate so I have included the important information below for your convenience. If you would like to browse through the hundreds of exhibitors I would suggest using the following link which offers the ability to browse by category. Modern furniture makers like myself can be found in the Furniture & Lighting section.
Baltimore Convention Center One West Pratt Street Baltimore, MD 21201 Link
Hours
Thursday, February 25 (10 am – 6 pm) Friday, February 26 (10 am – 9 pm) Saturday, February 27 (10 am – 6 pm) Sunday, February 28 (10 am – 5 pm)
There are a number of different ticket plans buy online
Or call the ACC at 800-836-3470 for more information
Sign up for the Newsletter (4-6 per year) Or visit www.nicoyektai.com for more information
Next Show: Architectural Digest Home Show in NYC
By Nico Yektai -New York based designer/maker Nico Yektai opened the doors to his Hamptons studio in 1995 after completing the MFA program at the School For American Craft at the Rochester Institute of Technology. The rigorous technical training complimented his background in Art History, which he studied, at Hobart College in Geneva NY. Yektai has synthesized this background into a singular style that has gained him national attention. Visit nicoyektai.com for more information
Like Lemmings Over A Cliff!
One day I realized that my collection of hand power tools had become quite old. Some of them are pushing 20 years! I don’t think I would have predicted this when I bought them so no real complaints. That is until today. A few weeks ago the brush on a Porter Cable 690 Plunge Router shot across the room. Needless to say work had to stop until I figured out what had happened. It turned out that the plastic cap had cracked and the brush sprang out of its home. I was able to screw it back in and get back to work. It is shocking that I have not ordered a replacement since my “field fix” is not going to last.
This was the culprit
Today my Porter Cable 6″ Random orbit sander had an incident. By incident I mean complete failure. A bearing blew, a screw sheared and into the recycling bin it goes.
A close up of the orbit mechanism and the busted bearing.
I wonder what will be next? I have my eye on a Panasonic 12V cordless drill that is acting up. Perhaps it could be my other Porter cable router, it is howling a bit. My fear is that there are probably half a dozen tools that are of this vintage. It would almost be easier for me if they all jumped at the same time!
By Nico Yektai -New York based designer/maker Nico Yektai opened the doors to his Hamptons studio in 1995 after completing the MFA program at the School For American Craft at the Rochester Institute of Technology. The rigorous technical training complimented his background in Art History, which he studied, at Hobart College in Geneva NY. Yektai has synthesized this background into a singular style that has gained him national attention. Visit nicoyektai.com for more information
Two New Tables With Glass
The new hall table has quickly evolved from the model stage to near completion good thing since the Architectural Digest Home Show is coming right up. This often happens when the miniature has clarified the major design considerations. I knew that this was going to be an interesting piece and more importantly I knew exactly what needed to be done. All of the head scratching was out of the way, thanks to the model building process. I will add a photo with the clamps off so you can get a feel for the process of going from model to real piece. The structure is faithful to the scale version but all of the detailing came to life in the full scale version.
The glass is on order and I am feeling inspired so I set out to make an accompanying piece. As I think about the upcoming shows that I will be participating in I realized that I would like to have a new pedestal table. I often use them as studies for new techniques and explorations. I am feeling like it is time to introduce something personal to the glass that is incorporated into my work.
Up to this point I have worked with glass in its most basic form- the rectangle. My furniture is capable of incorporating a stock material like this. Everything around that conventional piece of glass pushes, pulls and shifts away from convention. The natural evolution of this type of development is that I get to the point where I am comfortable with the new material and I can begin to push it from its expected form. This is the exact same process that I went through when I introduced concrete into my work. I cautiously incorporated it and then I began to allow it a greater role in the composition. Now I am ready to start the process with glass surfaces.
A pedestal table will serve me well for this experiment.
This time I am flying without a model so there will be a start and stop cadence to this one. The table is clamped to my workbench as I figure out the structure and the joinery. I am using steam bent curves from my inventory. I have an inventory of steam bent maple curves that I purchased from a company that specializes in making these parts.
The last curve is clamped in place to get a feel for the final form of the table. Now I need to figure out the glass top. This piece would suffer with a rectangular piece of glass – all I know is that the table needs a unique shape for the top.
Cardboard and scissors are my choice to work out the shape. I work it out so the glass hugs the shape of the dynamic under structure and it also adds dynamoc movement to the composition.
Now is where I panic – How much is this piece of glass going to cost?
I shift gears and make a drawing so I can get a quote. I create a grid on the template and then I draw it on my laptop and email it to my glass supplier.
Here is the drawing I sent them. The outer square is for reference only but it nicely shows the movement of the glass top. The silence of the glass supplier means that they may not have received my email or it could mean that this is ghoing to be cost prohibitive… my fingers are crossed.
Regardless of the glass snafu I press on with the table.
Before I left for the day I was able to shape and assemble one more leg. Today I will loosely assemble the third leg and work out the third curve. I seem to insist on not taking all of the pictures I need so I will be adding another post shortly.
By Nico Yektai -New York based designer/maker Nico Yektai opened the doors to his Hamptons studio in 1995 after completing the MFA program at the School For American Craft at the Rochester Institute of Technology. The rigorous technical training complimented his background in Art History, which he studied, at Hobart College in Geneva NY. Yektai has synthesized this background into a singular style that has gained him national attention. Visit nicoyektai.com for more information
